Exhaust valves for humidity-controlled ventilation systems
Self-regulating exhaust valve
Self-regulating exhaust valve additional temporized flow controlled
The extract vents CO2 are used for tertiary applications. They ensure a modulated extraction flow according to the CO2 levels of the premises.
AURÉA exhaust valves exhaust and supply air in dwellings and commercial spaces. These white plastic valves are specially designed to be fitted in
BEIP adjustable valves are made of white polystyrene. They exhaust and supply air in dwellings and commercial spaces in combination with heating,
Made of sheet steel covered with white epoxy paint, the BEMR vents consist of a suction cone, an adjustment shut-off and a lip seal for maintenance
BIR valves make it possible to diffuse air in only one direction. As a result, these valves may be fitted near the corners of walls without any risk
BORÉA white adjustable plastic vents are intended for inlet and extract air flows air in housing and tertiary premises. These vents are specially
Designed for use in ventilation installations, CAR backdraft dampers prevent outdoor air entering if the fan stops running.
The CARA roof vent is used for the air outlet or intake of installations using mechanical ventilation systems: single and double flow CMV, domestic
These roof vents supply and exhaust air in systems that use mechanical extract ventilation (single and dual flow MEV systems, air handling and
The CTP roof vent is used for the air outlet or intake of installations using mechanical ventilation systems: single and double flow CMV, domestic
Used as part of a B-type CMV hygro device (Atech No. 14 / 13-1910), the humidity sensitive EM HY air inlet is associated with the humidity sensitive
The air-inlets FILEA 30 are used to supply new air in the main rooms of a dwelling with single flow mechanical ventilation system.
PA air intakes provide fresh air intake or stale air outlet on the external wall in mechanical ventilation installations. The assembly consisting of
RDR adjustable flow regulators are made from class M1 plastic suitable for use at temperatures up to 60°C.
The flow regulator RDR is an element placed inside the duct in order to obtain a constant flow within a pressure range from 150 to 600 Pascals. It
RDR LP (RDR BP) adjustable flow regulators fit inside ducts to obtain a constant flow rate within pressure range of 20 to 100 Pa. They may be used
The RFCC cable operated damper is a circular damper for shutting off a branch duct in a ventilation or air conditioning network. It is fitted with a
The RM-ME motorized damper works in fully-open/fully-shut mode, operated by an electric motor
RM-ME self-regulating dual-flow motorised dampers are designed for ventilation systems used in commercial spaces. They modulate open and closed via
RMVT motorised dampers are powered by an On/Off blade driven by a thermal actuator. They feature a 100 mm to 200 mm circular blade to shut off the
RRM manual balancing dampers contain round blades to balance the flow of air in ventilation and air conditioning systems. They feature a composite
RRMJ manual balancing dampers contain round blades to balance the flow of air in ventilation and air conditioning systems. They feature a composite
TMM (wall) metal vents is used to supply and exhaust air in single and dual-flow mechanical extract ventilation systems. It's specially designed for
TMP (ceiling) metal vents is used to supply and exhaust air in single and dual-flow mechanical extract ventilation systems. It's specially designed
These exhaust valves are made of white plastic and are generally suited for applications in single-family houses. They are used to supply and